08-06-2011, 04:33 PM
karena biasa pake sakis3g pas coba pake ppp0 berhasil tapi ga tau cara exit nya....
:hammer:hammer:hammer
akhirnya ketemu juga
#poff
:hammer:hammer:hammer
(08-06-2011, 04:33 PM)gtx150 Wrote: karena biasa pake sakis3g pas coba pake ppp0 berhasil tapi ga tau cara exit nya....
:hammer:hammer:hammer
akhirnya ketemu juga
#poff
Quote:# example configuration for a dialup connection authenticated with PAP or CHAP
#
# This is the default configuration used by pon(1) and poff(1).
# See the manual page pppd(8) for information on all the options.
# MUST CHANGE: replace myusername@realm with the PPP login name given to
# your by your provider.
# There should be a matching entry with the password in /etc/ppp/pap-secrets
# and/or /etc/ppp/chap-secrets.
user "myusername@realm"
# MUST CHANGE: replace ******** with the phone number of your provider.
# The /etc/chatscripts/pap chat script may be modified to change the
# modem initialization string.
connect "/usr/sbin/chat -v -f /etc/chatscripts/pap -T ********"
# Serial device to which the modem is connected.
/dev/modem
# Speed of the serial line.
115200
# Assumes that your IP address is allocated dynamically by the ISP.
noipdefault
# Try to get the name server addresses from the ISP.
usepeerdns
# Use this connection as the default route.
defaultroute
# Makes pppd "dial again" when the connection is lost.
persist
# Do not ask the remote to authenticate.
noauth