[ Share ] Install & setting modem usb telkomflash c270 di backtrack
#11
(01-29-2012, 03:27 PM)konspirasi Wrote:
(01-29-2012, 02:43 PM)SKA007 Wrote: -mas .. kalo untuk sierra bisa gk ni mas ??

-eh ya mas ,, di BT ane blum keinstall itu wvdialconf,karena belum terinstall ya ane install aja,eh waktu ane install,dia malah download mas,untung ane masih pake vmware, jadi koneksi pake pnya si jendela Big Grin

-nah kalo msalnya ntar ane mw install dual boot, atau install sepenuhnya , sdangkan modem ane blum kedetect, gmn ane mw download it wvdial mas ...

ada solusi gk mas Big Grin
makasih sebelumnya ^_^

coba aja untuk sierra, ntar post hasilnya disini
download wvdial di flashdisk :p

wah ide yang cemerlang masbro , kok gk kepikir sama ane ya .. hahaha Huh

ini ane coba di vmware dulu
sudo lsusb
Code:
root@bt:~# sudo lsusb
Bus 002 Device 006: ID 1199:6880 Sierra Wireless, Inc.
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ane coba set dari ttyS0,ttys1,ttyUSB1 - ttyUSB6
tetep kyk gini yg kluar mas Huh
Code:
root@bt:~# gedit /etc/wvdial.conf
root@bt:~# sudo eject /dev/scd0
root@bt:~# sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- ^C
root@bt:~# sudo eject /dev/scd0
root@bt:~# sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- �W~
ttyUSB0<*1>: failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB3<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB4<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB5<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB5<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB5<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB6<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB6<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB6<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <[email protected]>.

atau mungkin gk bisa ya buat sierra C885 , padahal kan sama2 modem USB Huh
terus menggali ilmu ,pelajari dan berbagi

#12
bisa seharusnya bro, coba liat dmes |grep tty atau dmesg |grep sierra
paste disini hasilnya

#13
oke masbro Big Grin

dmesg |grep tty
Code:
root@bt:~# dmesg |grep tty
[    0.000000] console [tty0] enabled
[    2.865168] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.897363] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.940362] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.969721] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   28.664419] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB0
[   28.672108] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB1
[   28.680938] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB2
[   28.696521] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB3
[   28.707331] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB4
[   28.717496] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB5
[   28.726172] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB6
[  281.018631] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[  281.020815] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[  281.020962] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[  281.021155] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[  281.021345] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[  281.021490] sierra ttyUSB5: Sierra USB modem converter now disconnected from ttyUSB5
[  281.021630] sierra ttyUSB6: Sierra USB modem converter now disconnected from ttyUSB6
[ 4958.058413] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB0
[ 4958.140430] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB1
[ 4958.149024] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB2
[ 4958.159123] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB3
[ 4958.168162] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB4
[ 4958.177234] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB5
[ 4958.187267] usb 2-2.1: Sierra USB modem converter now attached to ttyUSB6

dmesg |grep sierra
Code:
root@bt:~# dmesg |grep sierra
[   28.387517] sierra 2-2.1:1.0: Sierra USB modem converter detected
[   28.664925] sierra 2-2.1:1.1: Sierra USB modem converter detected
[   28.672170] sierra 2-2.1:1.2: Sierra USB modem converter detected
[   28.681035] sierra 2-2.1:1.3: Sierra USB modem converter detected
[   28.696608] sierra 2-2.1:1.4: Sierra USB modem converter detected
[   28.707383] sierra 2-2.1:1.5: Sierra USB modem converter detected
[   28.717557] sierra 2-2.1:1.6: Sierra USB modem converter detected
[   28.728702] usbcore: registered new interface driver sierra
[   28.728772] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[  281.018631] sierra ttyUSB0: Sierra USB modem converter now disconnected from ttyUSB0
[  281.019914] sierra 2-2.1:1.0: device disconnected
[  281.020815] sierra ttyUSB1: Sierra USB modem converter now disconnected from ttyUSB1
[  281.020851] sierra 2-2.1:1.1: device disconnected
[  281.020962] sierra ttyUSB2: Sierra USB modem converter now disconnected from ttyUSB2
[  281.020992] sierra 2-2.1:1.2: device disconnected
[  281.021155] sierra ttyUSB3: Sierra USB modem converter now disconnected from ttyUSB3
[  281.021187] sierra 2-2.1:1.3: device disconnected
[  281.021345] sierra ttyUSB4: Sierra USB modem converter now disconnected from ttyUSB4
[  281.021376] sierra 2-2.1:1.4: device disconnected
[  281.021490] sierra ttyUSB5: Sierra USB modem converter now disconnected from ttyUSB5
[  281.021520] sierra 2-2.1:1.5: device disconnected
[  281.021630] sierra ttyUSB6: Sierra USB modem converter now disconnected from ttyUSB6
[  281.021660] sierra 2-2.1:1.6: device disconnected
[ 4958.046794] sierra 2-2.1:1.0: Sierra USB modem converter detected
[ 4958.132871] sierra 2-2.1:1.1: Sierra USB modem converter detected
[ 4958.140596] sierra 2-2.1:1.2: Sierra USB modem converter detected
[ 4958.149233] sierra 2-2.1:1.3: Sierra USB modem converter detected
[ 4958.159288] sierra 2-2.1:1.4: Sierra USB modem converter detected
[ 4958.168305] sierra 2-2.1:1.5: Sierra USB modem converter detected
[ 4958.177369] sierra 2-2.1:1.6: Sierra USB modem converter detected

waduh .. kok gitu ya Huh
terus menggali ilmu ,pelajari dan berbagi

#14
wkwkwk surem

abis dikonekin ke ttyUSB0 - 6 trus diskonek lagi, wew knp ya? di websitenya modem sierra ada driver khusus linux ga?

dari hasil diatas kayaknya sih modem attached to ttyUSB6 (yg terakhir), coba masukin ke wvdial.conf trus konek lagi

#15
(01-30-2012, 12:02 AM)konspirasi Wrote: wkwkwk surem

abis dikonekin ke ttyUSB0 - 6 trus diskonek lagi, wew knp ya? di websitenya modem sierra ada driver khusus linux ga?

dari hasil diatas kayaknya sih modem attached to ttyUSB6 (yg terakhir), coba masukin ke wvdial.conf trus konek lagi

mas ane skrng pake dual boot
udah kedetect modem ane mas Big Grin
tapi waktu ane coba konekin pake wvdial
muncul kayak gini mas
Code:
root@bt:~# --> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","telkomsel"
AT+CGDCONT=1,"IP","telkomsel"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Tue Jan 31 13:24:40 2012
--> Pid of pppd: 3837
--> Disconnecting at Tue Jan 31 13:24:41 2012
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)

itu udah konek apa belum mas ??

ane pake config ini
Code:
[Dialer Defaults]
Modem = /dev/ttyUSB3
Baud = 460800
Init = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","3data"
Phone = *99***1#
Dial Command = ATDT
Username = 3data
Password = 3data
Ask Password = off
Auto DNS = on
Check Def Route = off
Carrier Check = off
Stupid Mode = on
Auto Reconnect = off
Idle Seconds = 0
Abort on Busy = off
Abort on No Dialtone = off

Huh
terus menggali ilmu ,pelajari dan berbagi

#16
itu diatas belom konek

antara file config dengan yg dijalanin di wvdial kok beda ya? antara telkomsel sm 3??

running wvdial udah posisi root kan?

coba file wvdial sama wvdial.conf diganti chmod 777

#17
hehehe confignya itu hasil copas mas , bukan config yg sdang ane pakai ... tapi mrip kyk gitu cma ane ganti 3data jadi telkomsel Big Grin
phone ane ganti *99#

tapi udah solved kok om maslaahnya ,,, akhirnya bisa konek jg ni ..
pake pppd
http://forum.indonesianbacktrack.or.id/s...hp?tid=300

makasih banyak mas buat bantuannya slma ini , ane gk bisa ngasih apa2 ni Huh

cuma bisa blang makasih aja .. moga forumnya makin jaya ,dan makin banyak yg make linux Huh
terus menggali ilmu ,pelajari dan berbagi

#18
ouw nice share brother ane cobain dolo ya Big Grin
btw itu memang harus modem usb telkomsel aja ya yang lain kagak bisa ya,..??

#19
ntar saya coba, masih online pake windows nih...

#20
ijin nanya kk

cara ini bisa buat BT 5 juga ya?
Terima kasih infonya Smile
Semua orang adalah guru
Semua tempat adalah sekolah






Users browsing this thread: 1 Guest(s)