[Help] Install Nokia PC suite
#11
ini bang
Code:
root@bt:~# lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 09da:9090 A4 Tech Co., Ltd XL-750BK Laser Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0421:0273 Nokia Mobile Phones
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code:
root@bt:~# dmesg
0.426147] pci_bus 0000:00: on NUMA node 0
[    0.426148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.426250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.426273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.426298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[    0.429048] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.429076] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[    0.429102] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.429127] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[    0.429151] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.429178] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.429204] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[    0.429229] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.429286] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.429291] vgaarb: loaded
[    0.429393] SCSI subsystem initialized
[    0.429408] libata version 3.00 loaded.
[    0.429408] usbcore: registered new interface driver usbfs
[    0.429408] usbcore: registered new interface driver hub
[    0.429408] usbcore: registered new device driver usb
[    0.429408] PCI: Using ACPI for IRQ routing
[    0.429408] PCI: pci_cache_line_size set to 64 bytes
[    0.429408] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[    0.429408] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.429408] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[    0.429408] NetLabel: Initializing
[    0.429408] NetLabel:  domain hash size = 128
[    0.429408] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.429408] NetLabel:  unlabeled traffic allowed by default
[    0.429408] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.429408] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.430224] Switching to clocksource hpet
[    0.430239] Switched to NOHz mode on CPU #3
[    0.430252] Switched to NOHz mode on CPU #0
[    0.430228] Switched to NOHz mode on CPU #1
[    0.430233] Switched to NOHz mode on CPU #2
[    0.430252] AppArmor: AppArmor Filesystem Enabled
[    0.430252] pnp: PnP ACPI init
[    0.430252] ACPI: bus type pnp registered
[    0.430252] pnp 00:00: [bus 00-ff]
[    0.430252] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.430252] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.430252] pnp 00:00: [io  0x0d00-0xffff window]
[    0.430252] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.430252] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.430252] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[    0.430252] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.430252] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.430252] pnp 00:01: [dma 4]
[    0.430252] pnp 00:01: [io  0x0000-0x000f]
[    0.430252] pnp 00:01: [io  0x0081-0x0083]
[    0.430252] pnp 00:01: [io  0x0087]
[    0.430252] pnp 00:01: [io  0x0089-0x008b]
[    0.430252] pnp 00:01: [io  0x008f]
[    0.430252] pnp 00:01: [io  0x00c0-0x00df]
[    0.430252] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.430252] pnp 00:02: [io  0x0070-0x0071]
[    0.430252] pnp 00:02: [irq 8]
[    0.430252] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.430252] pnp 00:03: [io  0x0061]
[    0.430252] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.430252] pnp 00:04: [io  0x00f0-0x00ff]
[    0.430252] pnp 00:04: [irq 13]
[    0.430252] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.430252] pnp 00:05: [io  0x03f8-0x03ff]
[    0.430252] pnp 00:05: [irq 4]
[    0.430252] pnp 00:05: [dma 0 disabled]
[    0.430252] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.430252] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[    0.430252] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.430252] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[    0.430252] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[    0.430252] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.430252] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.430252] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430252] pnp 00:08: [io  0x0010-0x001f]
[    0.430252] pnp 00:08: [io  0x0022-0x003f]
[    0.430252] pnp 00:08: [io  0x0062-0x0063]
[    0.430252] pnp 00:08: [io  0x0065-0x006f]
[    0.430252] pnp 00:08: [io  0x0072-0x007f]
[    0.430252] pnp 00:08: [io  0x0080]
[    0.430252] pnp 00:08: [io  0x0084-0x0086]
[    0.430252] pnp 00:08: [io  0x0088]
[    0.430252] pnp 00:08: [io  0x008c-0x008e]
[    0.430252] pnp 00:08: [io  0x0090-0x009f]
[    0.430252] pnp 00:08: [io  0x00a2-0x00bf]
[    0.430252] pnp 00:08: [io  0x00b1]
[    0.430252] pnp 00:08: [io  0x00e0-0x00ef]
[    0.430252] pnp 00:08: [io  0x04d0-0x04d1]
[    0.430252] pnp 00:08: [io  0x040b]
[    0.430252] pnp 00:08: [io  0x04d6]
[    0.430252] pnp 00:08: [io  0x0c00-0x0c01]
[    0.430252] pnp 00:08: [io  0x0c14]
[    0.430252] pnp 00:08: [io  0x0c50-0x0c51]
[    0.430252] pnp 00:08: [io  0x0c52]
[    0.430252] pnp 00:08: [io  0x0c6c]
[    0.430252] pnp 00:08: [io  0x0c6f]
[    0.430252] pnp 00:08: [io  0x0cd0-0x0cd1]
[    0.430252] pnp 00:08: [io  0x0cd2-0x0cd3]
[    0.430252] pnp 00:08: [io  0x0cd4-0x0cd5]
[    0.430252] pnp 00:08: [io  0x0cd6-0x0cd7]
[    0.430252] pnp 00:08: [io  0x0cd8-0x0cdf]
[    0.430252] pnp 00:08: [io  0x0800-0x089f]
[    0.430252] pnp 00:08: [io  0x0000-0xffffffff disabled]
[    0.430252] pnp 00:08: [io  0x0b00-0x0b0f]
[    0.430252] pnp 00:08: [io  0x0b20-0x0b3f]
[    0.430252] pnp 00:08: [io  0x0900-0x090f]
[    0.430252] pnp 00:08: [io  0x0910-0x091f]
[    0.430252] pnp 00:08: [io  0xfe00-0xfefe]
[    0.430252] pnp 00:08: [io  0x0060-0x005f disabled]
[    0.430252] pnp 00:08: [io  0x0064-0x0063 disabled]
[    0.430252] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[    0.430252] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[    0.430252] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.430252] system 00:08: [io  0x040b] has been reserved
[    0.430252] system 00:08: [io  0x04d6] has been reserved
[    0.430252] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.430252] system 00:08: [io  0x0c14] has been reserved
[    0.430252] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.430252] system 00:08: [io  0x0c52] has been reserved
[    0.430252] system 00:08: [io  0x0c6c] has been reserved
[    0.430252] system 00:08: [io  0x0c6f] has been reserved
[    0.430252] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.430252] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.430252] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.430252] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.430252] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.430252] system 00:08: [io  0x0800-0x089f] has been reserved
[    0.430252] system 00:08: [io  0x0b00-0x0b0f] has been reserved
[    0.430252] system 00:08: [io  0x0b20-0x0b3f] has been reserved
[    0.430252] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.430252] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.430252] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.430252] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.430252] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.430252] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430252] pnp 00:09: [io  0x0060]
[    0.430252] pnp 00:09: [io  0x0064]
[    0.430252] pnp 00:09: [irq 1]
[    0.430252] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.430252] pnp 00:0a: [io  0x0000-0xffffffff disabled]
[    0.430252] pnp 00:0a: [io  0x0600-0x06df]
[    0.430252] pnp 00:0a: [io  0x0ae0-0x0aef]
[    0.430252] system 00:0a: [io  0x0600-0x06df] has been reserved
[    0.430252] system 00:0a: [io  0x0ae0-0x0aef] has been reserved
[    0.430252] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.430252] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[    0.430252] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[    0.430252] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.544146] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[    0.544148] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[    0.544150] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[    0.544151] pnp 00:0c: [mem 0x00100000-0xcfffffff]
[    0.544152] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[    0.544157] pnp 00:0c: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.544163] pnp 00:0c: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.544168] pnp 00:0c: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.544174] pnp 00:0c: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[    0.544213] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.544217] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.544281] pnp: PnP ACPI: found 13 devices
[    0.544283] ACPI: ACPI bus type pnp unregistered
[    0.544287] PnPBIOS: Disabled by ACPI PNP
[    0.579538] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.579542] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.579546] pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfeafffff]
[    0.579550] pci 0000:00:02.0:   bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.579555] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
[    0.579558] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.579562] pci 0000:00:0a.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.579566] pci 0000:00:0a.0:   bridge window [mem pref disabled]
[    0.579571] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[    0.579573] pci 0000:00:14.4:   bridge window [io  disabled]
[    0.579579] pci 0000:00:14.4:   bridge window [mem disabled]
[    0.579584] pci 0000:00:14.4:   bridge window [mem pref disabled]
[    0.579598] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.579602] pci 0000:00:02.0: setting latency timer to 64
[    0.579606] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.579610] pci 0000:00:0a.0: setting latency timer to 64
[    0.579616] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.579617] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.579619] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.579621] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.579622] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.579624] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.579625] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.579627] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[    0.579628] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[    0.579630] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.579631] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.579633] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.579635] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.579636] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.579638] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.579639] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.579641] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.579661] NET: Registered protocol family 2
[    0.579699] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.579825] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.580160] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.580317] TCP: Hash tables configured (established 131072 bind 65536)
[    0.580320] TCP reno registered
[    0.580323] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.580331] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.580382] NET: Registered protocol family 1
[    0.700081] pci 0000:01:00.0: Boot video device
[    0.700094] PCI: CLS 64 bytes, default 64
[    0.700122] Trying to unpack rootfs image as initramfs...
[    0.932186] Freeing initrd memory: 15132k freed
[    0.936026] cpufreq-nforce2: No nForce2 chipset.
[    0.936101] audit: initializing netlink socket (disabled)
[    0.936111] type=2000 audit(1328978094.932:1): initialized
[    0.947604] highmem bounce pool size: 64 pages
[    0.947609] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.948648] VFS: Disk quotas dquot_6.5.2
[    0.948684] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.949160] fuse init (API version 7.16)
[    0.949217] msgmni has been set to 1677
[    0.949407] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.949411] io scheduler noop registered
[    0.949414] io scheduler deadline registered (default)
[    0.949483] pcieport 0000:00:02.0: setting latency timer to 64
[    0.949508] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.949538] pcieport 0000:00:0a.0: setting latency timer to 64
[    0.949558] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[    0.949601] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.949617] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.949654] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[    0.949657] vesafb: scrolling: redraw
[    0.949660] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.949764] vesafb: framebuffer at 0xd5000000, mapped to 0xf8080000, using 1536k, total 1536k
[    0.954801] Console: switching to colour frame buffer device 128x48
[    0.959827] fb0: VESA VGA frame buffer device
[    0.959928] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.960027] ACPI: Power Button [PWRB]
[    0.960084] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.960155] ACPI: Power Button [PWRF]
[    0.960285] ACPI: acpi_idle registered with cpuidle
[    0.960299] ACPI: processor limited to max C-state 1
[    1.088262] isapnp: Scanning for PnP cards...
[    1.398527] isapnp: No Plug & Play device found
[    1.398606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.419109] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.680563] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.744763] brd: module loaded
[    1.745065] loop: module loaded
[    1.745215] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.745304] pata_acpi 0000:00:14.1: setting latency timer to 64
[    1.745496] Fixed MDIO Bus: probed
[    1.745567] PPP generic driver version 2.4.2
[    1.745627] tun: Universal TUN/TAP device driver, 1.6
[    1.745676] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.745771] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.745845] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.745921] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.745987] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.776062] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.778151] ehci_hcd 0000:00:12.2: debug port 1
[    1.780209] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbfff800
[    1.792063] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.794157] hub 1-0:1.0: USB hub found
[    1.796171] hub 1-0:1.0: 6 ports detected
[    1.798207] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.800249] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.802274] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.828061] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.830119] ehci_hcd 0000:00:13.2: debug port 1
[    1.832145] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbfff400
[    1.844062] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.846118] hub 2-0:1.0: USB hub found
[    1.848088] hub 2-0:1.0: 6 ports detected
[    1.850054] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.852029] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.854025] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.856015] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.880076] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbffe000
[    1.932125] Refined TSC clocksource calibration: 3400.140 MHz.
[    1.934086] Switching to clocksource tsc
[    1.940156] hub 3-0:1.0: USB hub found
[    1.942094] hub 3-0:1.0: 3 ports detected
[    1.944042] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.945968] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.947877] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.976061] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbffd000
[    2.036098] hub 4-0:1.0: USB hub found
[    2.037904] hub 4-0:1.0: 3 ports detected
[    2.039705] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.041539] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    2.043349] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.072066] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbffc000
[    2.132098] hub 5-0:1.0: USB hub found
[    2.133876] hub 5-0:1.0: 3 ports detected
[    2.135664] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    2.137499] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.139303] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.168060] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbffb000
[    2.228101] hub 6-0:1.0: USB hub found
[    2.229870] hub 6-0:1.0: 3 ports detected
[    2.231658] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.233467] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.235241] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.264066] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbffa000
[    2.324101] hub 7-0:1.0: USB hub found
[    2.325846] hub 7-0:1.0: 2 ports detected
[    2.327586] uhci_hcd: USB Universal Host Controller Interface driver
[    2.364070] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    2.365833] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.367779] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.369655] mousedev: PS/2 mouse device common for all mice
[    2.371562] rtc_cmos 00:02: RTC can wake from S4
[    2.372032] usb 3-2: new full speed USB device number 2 using ohci_hcd
[    2.389195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.396096] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.398029] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.400027] device-mapper: uevent: version 1.0.3
[    2.401995] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[    2.404063] device-mapper: multipath: version 1.3.0 loaded
[    2.406042] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.408115] EISA: Probing bus 0 at eisa.0
[    2.410093] EISA: Cannot allocate resource for mainboard
[    2.412074] Cannot allocate resource for EISA slot 1
[    2.414050] Cannot allocate resource for EISA slot 2
[    2.415996] Cannot allocate resource for EISA slot 3
[    2.417916] Cannot allocate resource for EISA slot 4
[    2.419791] Cannot allocate resource for EISA slot 5
[    2.421632] Cannot allocate resource for EISA slot 6
[    2.423451] Cannot allocate resource for EISA slot 7
[    2.425262] Cannot allocate resource for EISA slot 8
[    2.427028] EISA: Detected 0 cards.
[    2.428786] cpuidle: using governor ladder
[    2.430534] cpuidle: using governor menu
[    2.432260] EFI Variables Facility v0.08 2004-May-17
[    2.434127] TCP cubic registered
[    2.435929] NET: Registered protocol family 10
[    2.437966] NET: Registered protocol family 17
[    2.439663] Registering the dns_resolver key type
[    2.441390] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
[    2.443168] powernow-k8:    0 : pstate 0 (3400 MHz)
[    2.444908] powernow-k8:    1 : pstate 1 (2700 MHz)
[    2.446636] powernow-k8:    2 : pstate 2 (2200 MHz)
[    2.448326] powernow-k8:    3 : pstate 3 (800 MHz)
[    2.450547] Using IPI No-Shortcut mode
[    2.452273] PM: Hibernation image not present or could not be loaded.
[    2.452279] registered taskstats version 1
[    2.454116]   Magic number: 0:527:590
[    2.455814] rtc_cmos 00:02: setting system clock to 2012-02-11 16:34:57 UTC (1328978097)
[    2.457531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.459235] EDD information not available.
[    2.461004] Freeing unused kernel memory: 696k freed
[    2.462933] Write protecting the kernel text: 5420k
[    2.464676] Write protecting the kernel read-only data: 1892k
[    2.478279] udev: starting version 151
[    2.480018] udevd (64): /proc/64/oom_adj is deprecated, please use /proc/64/oom_score_adj instead.
[    2.499653] Linux agpgart interface v0.103
[    2.501033] ahci 0000:00:11.0: version 3.0
[    2.501053] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.501159] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.501162] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    2.506641] scsi0 : ahci
[    2.508825] scsi1 : ahci
[    2.510518] scsi2 : ahci
[    2.512158] scsi3 : ahci
[    2.513764] ata1: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd00 irq 22
[    2.515333] ata2: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffd80 irq 22
[    2.516872] ata3: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe00 irq 22
[    2.518346] ata4: SATA max UDMA/133 abar m1024@0xfbfffc00 port 0xfbfffe80 irq 22
[    2.520037] scsi4 : pata_atiixp
[    2.521523] scsi5 : pata_atiixp
[    2.523292] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    2.524729] [drm] Initialized drm 1.1.0 20060810
[    2.524755] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    2.596123] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[    2.597802] generic-usb 0003:09DA:9090.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:12.0-2/input0
[    2.604182] input: A4TECH USB Device as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input4
[    2.606102] generic-usb 0003:09DA:9090.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:12.0-2/input1
[    2.609994] usbcore: registered new interface driver usbhid
[    2.611976] usbhid: USB HID core driver
[    2.836068] ata2: SATA link down (SStatus 0 SControl 300)
[    2.838139] ata1: SATA link down (SStatus 0 SControl 300)
[    3.008062] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.011071] ata3.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[    3.013110] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.015180] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.018211] ata3.00: configured for UDMA/133
[    3.020230] ata4.00: ATAPI: ATAPI   iHAS124   Y, BL0W, max UDMA/100
[    3.020320] scsi 2:0:0:0: Direct-Access     ATA      ST3250318AS      CC38 PQ: 0 ANSI: 5
[    3.020416] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.020418] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.020450] sd 2:0:0:0: [sda] Write Protect is off
[    3.020452] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.020467] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.034849] ata4.00: configured for UDMA/100
[    3.038727] scsi 3:0:0:0: CD-ROM            ATAPI    iHAS124   Y      BL0W PQ: 0 ANSI: 5
[    3.043111] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.045310] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.047565] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.047599]  sda: sda1 sda2
[    3.047625] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    3.052130] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.074519] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.076753] nouveau 0000:01:00.0: setting latency timer to 64
[    3.077497] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0cf200a1)
[    3.079720] checking generic (d5000000 180000) vs hw (d8000000 8000000)
[    3.079722] checking generic (d5000000 180000) vs hw (d4000000 4000000)
[    3.079723] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[    3.081953] Console: switching to colour dummy device 80x25
[    3.086377] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    3.086385] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[    3.086388] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[    3.273736] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    3.273740] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    3.273743] [drm] nouveau 0000:01:00.0: Bios version 70.26.20.00
[    3.273746] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[    3.273749] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[    3.273752] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[    3.273756] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[    3.273759] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[    3.273762] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011380 00000000
[    3.273765] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 08011382 00020030
[    3.273768] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02022362 00020010
[    3.273772] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[    3.273775] [drm] nouveau 0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
[    3.273779] [drm] nouveau 0000:01:00.0:   1: 0x00010130: type 0x30 idx 1 tag 0x51
[    3.273783] [drm] nouveau 0000:01:00.0:   2: 0x00002261: type 0x61 idx 2 tag 0x08
[    3.273788] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x69A3
[    3.303708] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x70C6
[    3.501037] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x85CD
[    3.501041] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x85D7
[    3.501097] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x87AC
[    3.501100] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x8811
[    3.520947] [drm] nouveau 0000:01:00.0: 0x8811: Condition still not met after 20ms, skipping following opcodes
[    3.520956] [drm] nouveau 0000:01:00.0: voltage table 0x40 unknown
[    4.000043] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[    4.000047] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 270MHz shader 540MHz
[    4.000052] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 810MHz shader 810MHz voltage 10mV
[    4.000056] [drm] nouveau 0000:01:00.0: 3: memory 540MHz core 1800MHz shader 1800MHz voltage 20mV
[    4.000109] [TTM] Zone  kernel: Available graphics memory: 429758 kiB.
[    4.000116] [TTM] Zone highmem: Available graphics memory: 1678818 kiB.
[    4.000119] [TTM] Initializing pool allocator.
[    4.000129] [drm] nouveau 0000:01:00.0: Detected 1536MiB VRAM
[    4.004996] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    4.005008] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[    4.005083] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 4/0/0/0, 3
[    4.006136] [drm] nouveau 0000:01:00.0: failed to load fuc409d
[    4.010065] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.010069] [drm] No driver support for vblank timestamp query.
[    4.172070] [drm] nouveau 0000:01:00.0: allocated 1360x768 fb: 0x8020000, bo f6f2c800
[    4.172116] fbcon: nouveaufb (fb0) is primary device
[    4.208799] Console: switching to colour frame buffer device 170x48
[    4.211518] fb0: nouveaufb frame buffer device
[    4.211537] drm: registered panic notifier
[    4.211558] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[    5.061882] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.670343] Adding 999420k swap on /dev/sda1.  Priority:-1 extents:1 across:999420k
[    7.208962] udev: starting version 151
[    7.418933] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    7.777346] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    7.781014] wmi: Mapper loaded
[    7.793954] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    7.794008] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[    7.852658] lp: driver loaded but no devices found
[    7.876166] atl1c 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.876175] atl1c 0000:02:00.0: setting latency timer to 64
[    8.012467] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
[    8.228199] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.272510] hda-codec: no NID for mapping control Independent HP:0:0
[    8.274391] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    8.274393] hda_intel: Disable MSI for Nvidia chipset
[    8.274410] HDA Intel 0000:01:00.1: setting latency timer to 64
[    9.193551] atl1c 0000:02:00.0: irq 42 for MSI/MSI-X
[    9.252496] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   50.344059] usb 2-2: new high speed USB device number 2 using ehci_hcd
[   50.550337] NET: Registered protocol family 35
[   50.554996] usbcore: registered new interface driver cdc_ether
[   50.558073] usb 2-2: bad CDC descriptors
[   50.558093] usbcore: registered new interface driver rndis_host
[   50.558562] usbcore: registered new interface driver cdc_phonet
[   50.566938] cdc_acm 2-2:1.1: ttyACM0: USB ACM device
[   50.568080] cdc_acm 2-2:1.3: ttyACM1: USB ACM device
[   50.568360] usbcore: registered new interface driver cdc_acm
[   50.568361] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[   50.621729] cfg80211: Calling CRDA to update world regulatory domain
[   50.655884] usbcore: registered new interface driver rndis_wlan
[   50.688906] cfg80211: World regulatory domain updated:
[   50.688909] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   50.688911] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   50.688913] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   50.688914] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   50.688916] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   50.688917] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   53.674290] usb 2-2: USB disconnect, device number 2
[   54.576051] usb 2-2: new high speed USB device number 3 using ehci_hcd
[   54.730722] usbcore: registered new interface driver uas
[   54.736098] Initializing USB Mass Storage driver...
[   54.736195] scsi6 : usb-storage 2-2:1.0
[   54.736276] usbcore: registered new interface driver usb-storage
[   54.736278] USB Mass Storage support registered.
[   55.736737] scsi 6:0:0:0: Direct-Access     Nokia    S60              1.0  PQ: 0 ANSI: 0
[   55.737001] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   55.738233] sd 6:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)
[   55.738602] sd 6:0:0:0: [sdb] Write Protect is off
[   55.738604] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   55.738606] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   55.739851] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   56.188153]  sdb: sdb1
[   56.188157] sdb: p1 size 15720448 extends beyond EOD, enabling native capacity
[   56.189516] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   56.190275]  sdb: sdb1
[   56.190278] sdb: p1 size 15720448 extends beyond EOD, truncated
[   56.191768] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   56.191771] sd 6:0:0:0: [sdb] Attached SCSI removable disk

#12
sip, jadi gini...dari lsusb itu kan kelihatan posisi nokia nya ada dimana:
Code:
Bus 002 Device 003: ID 0421:0273 Nokia Mobile Phones

tapi tunggu dulu, data dari dmesg menunjukkan klo hp nokia menjadi USB storage dengan memory sebesar kira2 7.75GB, bisa dilihat disini:
Code:
[   54.576051] usb 2-2: new high speed USB device number 3 using ehci_hcd
[   54.730722] usbcore: registered new interface driver uas
[   54.736098] Initializing USB Mass Storage driver...
[   54.736195] scsi6 : usb-storage 2-2:1.0
[   54.736276] usbcore: registered new interface driver usb-storage
[   54.736278] USB Mass Storage support registered.
[   55.736737] scsi 6:0:0:0: Direct-Access     Nokia    S60              1.0  PQ: 0 ANSI: 0
[   55.737001] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   55.738233] sd 6:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)

unmount dulu usb storagenya, bisa pake explorer trus klik "safely remove drive" atau:
Code:
umount /dev/sdb1

knp kok sdb1?? dari sini bro (kelanjutan dari dmesg diatas):
Code:
[   55.738602] sd 6:0:0:0: [sdb] Write Protect is off
[   55.738604] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[   55.738606] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   55.739851] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   56.188153]  sdb: sdb1
[   56.188157] sdb: p1 size 15720448 extends beyond EOD, enabling native capacity

setelah itu lakukan ini untuk menghilangkan mode storage usb nokia:
Code:
rmmod usb-storage

lakukan modprobe untuk memanggil modem usb pada nokia:
Code:
modprobe usbserial vendor=0x0421 product=0x0273

sudah?? sekarang cabut henpon, tunggu sebentar trus masukin lagi, ketik ini di konsole untuk melihat lokasi modemnya:
Code:
ls -la /dev/ttyU*

jika muncul ttyUSB0 maka masukin parameter tsb ke Modem = /dev/ttyUSB0 di wvdial.conf

jalankan wvdial

klo ada error post lagi disini, have fun Big Grin

#13
ane pelajarin pelan2 bang.. biar ane paham..hehe
maklum ya bang..Smile

#14
terus coba bro, LINUX IS NOT FOR FAINTED HEART!! IT'S FOR FIGHTER WHO WANTS TO LEARN HARD AND GET MOOOREEEE PAIIIINNN!! hahahaha Tongue

#15
hasilnya masih seperti ini bang :
Code:
root@bt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Warning: section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory

settingan wvdial.conf nya gini :
Code:
[Dealer Defaults]
Modem = /dev/ttyUSB0
Modem Type = Analog Modem
Init1 = ATZE0Q0V1
Init2 = ATE0Q0V1
Init3 = AT
Init4 = ATQ0 V1 E1 S0=0 +FCLASS=0
Baud = 460800
FlowControl = CRTSCTS
ISDN = 0
Dial Command = ATDT
Phone = *99#
Ask Password = 0
Username = ppp
Password = ppp
Stupid Mode = 1
Auto DNS = 1
New PPPD = yes
Compuserve = 0

apa mungkin ane salah install wvdial nya atau gimana ya..??

#16
udah yakin posisi modem ada di ttyUSB0 bro?
klo jalanin wvdialconf gmn hasilnya? paste disini coba, ane pengen liat

coba ganti wvdial.conf nya pake ini:
Code:
[Dialer Defaults]
Modem = /dev/ttyUSB0
Modem Type = Analog Modem
Init1 = ATZE0Q0V1
Init2 = ATE0Q0V1
Init3 = AT+CGDCONT=1,”IP”,”APN”
Init4 = ATQ0 V1 E1 S0=0 +FCLASS=0
Baud = 460800
FlowControl = CRTSCTS
ISDN = 0
Dial Command = ATDT
Phone = *99#
Ask Password = 0
Username =
Password =
Stupid Mode = 1
Auto DNS = 1
New PPPD = yes
Compuserve = 0

masukin username n password sesuai provider kartu GSM, trus pada line Init3 ganti APN sesuai dengan APN kartu GSM, setau ane klo modem di hp harus pake command AT untuk memanggil modemnya (ane jg gitu dulu Big Grin)

#17
Code:
root@bt:~# rmmod usb-storage

Code:
root@bt:~# modprobe usbserial vendor=0x0421 product=0x0273

Code:
root@bt:~# ls -la /dev/ttyU*
crw-rw---- 1 root dialout 188, 0 2012-02-12 01:09 /dev/ttyUSB0

Code:
root@bt:~#wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <[email protected]>.

Code:
root@bt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZE0Q0V1
--> Sending: ATQ0
--> Re-Sending: ATZE0Q0V1
--> Modem not responding.

ini bang hasilnya seperti ini :
Code:
root@bt:~# rmmod usb-storage

*EDITED!

#18
wah pas di wvdialconf modem not detected tuh bro, coba langkah2 awal lagi dengan sedikit penyesuaian atau kreatifitas sampai muncul modem di wvdialconf

#19
masih salah dimananya ya..??
masih gak bisa juga..

Code:
root@bt:~# modprobe usbserial vendor=0x0421 product=0x0275
root@bt:~# ls -la /dev/ttyU*
crw-rw---- 1 root dialout 188, 0 2012-02-12 05:35[color=#FFA500] /dev/ttyUSB0[/color]
root@bt:~# gedit /etc/wvdial.conf
root@bt:~# gedit /etc/wvdial.conf
root@bt:~# wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- Nokia
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyACM1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyACM1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@bt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Sending: ATQ0 V1 E1 S0=0 +FCLASS=0
ATQ0 V1 E1 S0=0 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sun Feb 12 05:38:49 2012
--> Pid of pppd: 2076
--> Disconnecting at Sun Feb 12 05:38:50 2012
--> The PPP daemon has died: pppd options error (exit code = 2)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 2)
root@bt:~#

#20
udah bisa tuh sebenernya tinggal username n passwordnya bener ga?






Users browsing this thread: 2 Guest(s)