[checkpoint]

Mohon maaf sebelumnya sama Om Admin, Klo posting Thread ini ngga mutu atau repost mohon di hapus aja...
saya sudah googling tp blm dapet sampe sekarang.

wvdial saya bermasalah, muncul seperti ini ;

Code:

root@Santoso:~# wvdial

--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT 21600000

--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sun Feb 1 18:08:00 2015
--> Pid of pppd: 3357
--> Using interface ppp0
--> pppd: �[7f]
--> pppd: �[7f]
--> pppd: �[7f]
--> pppd: �[7f]
--> pppd: �[7f]
--> pppd: �[7f]
--> pppd: �[7f]
--> Disconnecting at Sun Feb 1 18:08:37 2015
--> The PPP daemon has died: Pty program error (exit code = 9)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds

apa yang salah ya Om...?

Code:

Ni script wvdial nya ;

[Dialer Defaults]

Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyACM0
Username = 3data
Password = 3data
Baud = 460800
Carrier Check = no
Stupid Mode = yes
Auto Reconnect = on
Check DNS = off
Dial Attempts = 1

[Maroce11]

Waah jalau wvdial ane ga ngerti om, tapi mungkin om bisa coba make sakis3g om, lebih mudah dibandingkan wvdial kayaknya om

[mr.me]

coba paste sini hasil wvdialconf nya ?