[joens0985]

Code:

root@bt:~# rmmod usb-storage

Code:

root@bt:~# modprobe usbserial vendor=0x0421 product=0x0273

Code:

root@bt:~# ls -la /dev/ttyU*
crw-rw---- 1 root dialout 188, 0 2012-02-12 01:09 /dev/ttyUSB0

Code:

root@bt:~#wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3  
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected!  Is it in use by another program?
Did you configure it properly with setserial?

Please read the FAQ at http://open.nit.ca/wiki/?WvDial

If you still have problems, send mail to <[email protected]>.

Code:

root@bt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZE0Q0V1
--> Sending: ATQ0
--> Re-Sending: ATZE0Q0V1
--> Modem not responding.

---

ini bang hasilnya seperti ini :

Code:

root@bt:~# rmmod usb-storage

*EDITED!